Electrical inspectorate,Energy department

Watch video

1. Follow the Watch Video Registration
Login

2. Once the Login is succeed then click on [Business Details]

3. Fill All the Business Details e.g. For [Applicant Details], [Owner Details] and [Installation Address].

4. Once these details are filled then click on Submit button.

5. On Successful submission , there is a Message of successful submission

[Data Added Successfully.]

6. Now go Back to Dashboard and click on Drawing Approval Form Tab Menu

Click on Form-A Application Tab

7. In Application Details -> Application For [Dropdown Menu] Select Transformer Transmission

8. Then in Electricity Supplier Company->Electricity Supplier Company

9. Next Select Power Distribution Area from dropdown menu

10. Load Sanction Details

11. Load Sanction Details in KVA

12. Load Sanction Voltage System Unit

13. In Backup supply details

a. Backup Supply Type

b. Backup Generation Capacity(In KVA/KW)

c. Backup Generation Output Voltage(In Volt)

14. On Successful submission -> Data Added Successfully. Message will be display there.

Next Click on Click on DG Set/ Solar Power / Electrical Load Details Tab

15. Click on Click here to ADD Items.

a. Equipment Name

b. Quantity

c. Capacity

d. Unit

If above details are filled the click on Add Button as shown in fig above.

Next click on 3rd Tab: Attachment

16. Attach all necessary (*) and required documents.

a. Note: Document must be clear and visible to seen. Otherwise your application may be rejected

17. Next Scroll down click on button if all details are correct then click on button

Note: if any information filled wrong by mistake go back and correct first that then follow Step No. 16 and submit the application.

18. On successful submission it redirect to Application status as shown in fig below :-

19. You can also check application status by clicking “Application Status “Tab of Dashboard menu.

Watch video

1. Follow the Watch Video Registration
Login

2. Once the Login is succeed then click on [Business Details]

3. Fill All the Business Details e.g. For [Applicant Details], [Owner Details] and [Installation Address].

4. Once these details are filled then click on Submit button.

5. On Successful submission , there is a Message of successful submission

[Data Added Successfully.]

6. Now go Back to Dashboard and click on Drawing Approval Form Tab Menu

Click on Form-A Application Tab

7. In Application Details -> Application For [Dropdown Menu] Select DG Set

8. Then in Electricity Supplier Company->Electricity Supplier Company

9. Next Select Power Distribution Area from dropdown menu

10. Load Sanction Details

11. Load Sanction Details in KVA

12. Load Sanction Voltage System Unit

13. In Backup supply details

a. Backup Supply Type

b. Backup Generation Capacity(In KVA/KW)

c. Backup Generation Output Voltage(In Volt)

14. On Successful submission -> Data Added Successfully. Message will be display there.

Next Click on Click on DG Set/ Solar Power / Electrical Load Details Tab

15. Click on Click here to ADD Items.

a. Equipment Name

b. Quantity

c. Capacity

d. Unit

If above details are filled the click on Add Button as shown in fig above.

Next click on 3rd Tab: Attachment

16. Attach all necessary (*) and required documents.

a. Note: Document must be clear and visible to seen. Otherwise your application may be rejected

17. Next Scroll down click on button if all details are correct then click on button

Note: if any information filled wrong by mistake go back and correct first that then follow Step No. 16 and submit the application.

18. On successful submission it redirect to Application status as shown in fig below :-

19. You can also check application status by clicking “Application Status “Tab of Dashboard menu.

Watch video

1. Follow the Watch Video Registration
Login

2. Once the Login is succeed then click on [Business Details]

3. Fill All the Business Details e.g. For [Applicant Details], [Owner Details] and [Installation Address].

4. Once these details are filled then click on Submit button.

5. On Successful submission , there is a Message of successful submission

[Data Added Successfully.]

6. Now go Back to Dashboard and click on Drawing Approval Form Tab Menu

Click on Form-A Application Tab

7. In Application Details -> Application For [Dropdown Menu] Select Solar Power

8. Then in Electricity Supplier Company->Electricity Supplier Company

9. Next Select Power Distribution Area from dropdown menu

10. Load Sanction Details

11. Load Sanction Details in KVA

12. Load Sanction Voltage System Unit

13. In Backup supply details

a. Backup Supply Type

b. Backup Generation Capacity(In KVA/KW)

c. Backup Generation Output Voltage(In Volt)

14. On Successful submission -> Data Added Successfully. Message will be display there.

Next Click on Click on DG Set/ Solar Power / Electrical Load Details Tab

15. Click on Click here to ADD Items.

a. Equipment Name

b. Quantity

c. Capacity

d. Unit

If above details are filled the click on Add Button as shown in fig above.

Next click on 3rd Tab: Attachment

16. Attach all necessary (*) and required documents.

a. Note: Document must be clear and visible to seen. Otherwise your application may be rejected

17. Next Scroll down click on button if all details are correct then click on button

Note: if any information filled wrong by mistake go back and correct first that then follow Step No. 16 and submit the application.

18. On successful submission it redirect to Application status as shown in fig below :-

19. You can also check application status by clicking “Application Status “Tab of Dashboard menu.

Watch video

1. Follow the Watch Video Registration
Login

2. Once the Login is succeed then click on [Business Details]

3. Fill All the Business Details e.g. For [Applicant Details], [Owner Details] and [Installation Address].

4. Once these details are filled then click on Submit button.

5. On Successful submission , there is a Message of successful submission

[Data Added Successfully.]

6. Now go Back to Dashboard and click on Drawing Approval Form Tab Menu

Click on Form-A Application Tab

7. In Application Details -> Application For [Dropdown Menu] Select hydro power

8. Then in Electricity Supplier Company->Electricity Supplier Company

9. Next Select Power Distribution Area from dropdown menu

10. Load Sanction Details

11. Load Sanction Details in KVA

12. Load Sanction Voltage System Unit

13. In Backup supply details

a. Backup Supply Type

b. Backup Generation Capacity(In KVA/KW)

c. Backup Generation Output Voltage(In Volt)

14. On Successful submission -> Data Added Successfully. Message will be display there.

Next Click on Click on DG Set/ Solar Power / Electrical Load Details Tab

15. Click on Click here to ADD Items.

a. Equipment Name

b. Quantity

c. Capacity

d. Unit

If above details are filled the click on Add Button as shown in fig above.

Next click on 3rd Tab: Attachment

16. Attach all necessary (*) and required documents.

a. Note: Document must be clear and visible to seen. Otherwise your application may be rejected

17. Next Scroll down click on button if all details are correct then click on button

Note: if any information filled wrong by mistake go back and correct first that then follow Step No. 16 and submit the application.

18. On successful submission it redirect to Application status as shown in fig below :-

19. You can also check application status by clicking “Application Status “Tab of Dashboard menu.

Watch video

How to do registration.

How to Login .

How to fill bussiness details.

How to Apply for approval of Transformer/Transmission and inspection

How to Apply for approval of Disel Generator set drawing and inspection

How to Apply for approval of Solar Power drawing and inspection

How to Apply for approval of hydro power approval drawing and inspection

How to make Drawing, Inspection, or both Payment online.

How to make inspection bill payment online.

How to make miscellaneous Payment.

Information about Transaction Tab for various payment history.

Information about Annual Bill Payment Process.